3D tiskalnik: FORM2


The printer, employing the photopolymerisation method, guides the precision laser across a container with liquid resin that is then hardened layer by layer. The result is a high-resolution 3D print, ranking the printer among the finest desktop 3D printers. The final hardness of the product is achieved after it has been submerged in isopropyl alcohol for 15 minutes and cured under a UV light at 80°C.


The final product can measure up to 145 × 145 × 175mm.


The most suitable file input for the printer is STL format. (The surface of the model/prototype in STL is composed of small triangles.) Nevertheless, any standard 3D modelling software format can be used, as it will be transformed into the STL format in RogLab.



• Print technology: stereolithography  (SLA – uses a laser beam to cure a liquid polymer layer

by layer)

• Machine size: 350 x 330 x 520mm

• Build volume: 145 × 145 × 175 mm

• Layer thickness: 0.025, 0.050, 0.100 mm (25, 50, 100 microns)

• Laser spot size: 0.14mm (140 microns)

• Laser power: 250mW

• Power requirements: on average 65 W

• Material: resins of different hardness, rubber, wax-like casting material

• Compatible software: PreForm Software

• Interactive touchscreen

• File input format: .STL, .OBJ

• File output format: .FORM

• Connectivity: WiFi, Ethernet and USB